How Does The Bubble Film Machine Produce Bubbles

How does the bubble film machine produce bubbles? The indispensable mechanical equipment in the production process of bubble film is the bubble film machine. Bubble film is actually a film containing a bubble interlayer in the middle of the film. If the bubble film machine is not well controlled, it is likely that under the limited time and material restrictions, the quality and output of your product are not so ideal; On the contrary, if you control the bubble film machine, under the limited time and material restrictions, your product quality is not only high quality, the product output is also very full. So how to standardize our bubble film machine operation, the following is a simple introduction for you.

1. Check that the temperature automatic control is in good condition, the heating appliances are in good condition, and pay attention to timely adjusting the heating temperature at each point within the target range.

2. Check the traction speed and control the film thickness.

3. Observe and adjust the uniform thickness of the film, and the folding diameter meets the standard.

4, check the air storage cylinder pressure, not too high, but there should be a backup pressure.

5, check and control the ratio of raw materials and mix evenly.

6, check the raw materials for impurities, especially should be timely with magnets to check the iron mixed.

7, check the speed reduction box and air compressor cylinder lubricating oil lubrication.

8. Regularly check the temperature rise of each running motor and the transmission of the bubble film machine.

Through the above introduction, you should know how the bubble film machine is to produce bubbles!