How Long Does The Air Cushion Film Machine Need To Be Maintainedå

How long does the air cushion film machine need to be maintained during operation? Why do bubble film machines need daily maintenance? In the long-term use of the bubble film machine, it is necessary to do a reasonable maintenance work, so as to effectively construct the incidence of failure. So how to maintain the bubble film machine? Let's take a look together.

In the long-term use of the film machine, it is necessary to do a reasonable maintenance work, so as to effectively reduce the occurrence of failures.

First, when feeding the hopper, it must be clean and strictly prevent metal debris, sand and small tools from entering the feed port to prevent damage to the barrel and screw. If abnormal sound is found during operation, it should be stopped immediately for processing.

Second, each time before the boot should be checked each system, usually pay attention to check the lubrication of the lubrication parts.

Thirdly, regular maintenance, a thorough cleaning of the die head every three months, a replacement of grease for various bearings every three months, a replacement of lubricating oil for the reducer every six months, and an overhaul of the equipment as a whole every two years.

Fourth, the screw is taken out of the barrel for some reason, should be properly handled to prevent deformation, if not installed back into the barrel for a long time, the screw must be hung vertically to prevent damage, bending and deformation, the surface of the barrel and the screw are coated with anti-rust oil for protection.

After reading the above introduction, you should know that the bubble film machine needs daily maintenance!